NC ROTARY TABLE
MX series
4축 표준사양
NC ROTARY TABLE
최대.스핀들 속도가 75min-1로 향상되어 택타임이 단축되고 생산성이 향상되었습니다.
인덱싱 시간 39% 단축(KITAGAWA 자체 컨트롤러 사용)
MR 시리즈와 동등한 장착 치수
내장형 로터리 조인트 사용 가능
Product Specifications
| Model | MX160 | ||||
|---|---|---|---|---|---|
| Right-handed type | × | ||||
| Left-handed type | ○ | ||||
| Table Diameter (mm) | ø165 | ||||
| Centre Hole Diameter (mm) | ø50H7 | ||||
| Through Hole Diameter (mm) | ø40 | ||||
| Centre Height (mm) | 140 | ||||
| Clamping Method | Pneumatic | ||||
| Clamping Torque (N･m) (at 0.5 MPa) |
310 | ||||
| Motor Axis Reduced Inertia (kg･m2) | 0.00023 | ||||
| Servomotor (for Sanyo spec.) | R2AA08075FXPGPM6 | ||||
| Total Reduction Ratio | 1/40 | ||||
| Max. Rotation Speed (min-1) | 75 (at motor 3000min-1) |
||||
| Allowable Work Inertia (kg･m2) | 0.25 | ||||
| Indexing Accuracy (sec) | 40 | ||||
| Repeatability (sec) | 8 | ||||
| Mass of Product (kg) | 43 | ||||
| Allowable Load | Horizontal (kg) | 80 | |||
| Vertical (kg) | 40 | ||||
| Manual Tailstock (as an option) | MR160RN | ||||
| Tail Spindle (as an option) | MSR142A/TSR142A | ||||
| Rotary Joint (as an option) | RJ40H16P01 Hydraulic/Pneumatic 4 ports |
||||
| Outline Drawing | Kitagawa Own Controller Spec. | 2D |  |
||
 |
|||||
 |
|||||
 |
|||||
| 3D |  |
||||
 |
|||||
| 4th axis spec. (Sanyo spec.) | 3D | |
|||
|
|||||
| Option Outline Drawing |
Tailstock | Tail Spindle | ||||