NC ROTARY TABLE
RKT180
5축 NCRT
NC ROTARY TABLE
롤러 기어 및 캠 구조
컴팩트한 머시닝센터를 위한 최적의 솔루션
옵션으로 제공되는 내장형 회전 조인트(유압 포트 5개 및 공압 포트 1개)
낮은 유지보수 달성
Product Specifications
| Model | RKT180 | ||
|---|---|---|---|
| Tilting Angle Range | -35°～+110° | ||
| Table Diameter (mm) | φ95 | ||
| Centre Hole Diameter (mm) | φ50H7 | ||
| Through Hole Diameter (mm) | φ50 | ||
| Centre Height (mm) | 170 | ||
| Clamping Method | Pneumatic | ||
| Clamping Torque (N･m) (at 0.5 MPa) | Rotating axis | 350 | |
| Tilting axis | 550 | ||
| Motor Axis Reduced Inertia (kg･m2) | Rotating axis | 0.000239 | |
| Tilting axis | 0.000425 | ||
| Servomotor (for Fanuc spec.) | αiF2/5000 | ||
| Total Reduction Ratio | Rotating axis | 1/72 | |
| Tilting axis | 1/120 | ||
| Max. Rotation Speed (min-1) | Rotating axis | 41.6 (at motor 3000-1) | |
| Tilting axis | 25 (at motor 3000-1) | ||
| Allowable Work Inertia (kg･m2) | 0.25 | ||
| Indexing Accuracy (sec) | Rotating axis | 20 | |
| Tilting axis | 20 | ||
| Repeatability (sec) | Rotating axis | 8 | |
| Tilting axis | 4 | ||
| Mass of Product (kg) | 193 | ||
| Allowable Load | 60 | ||
| 40 | |||
| Built-in Rotary Joint (as an option) | RJ50RKT180 Hydraulic/Pneumatic 5 ports +Pneumatic exclusive 1 port |
||
| Outline Drawing | Kitagawa own controller spec. | 2D |  |
 |
|||
 |
|||
 |
|||
| 3D |  |
||
 |
|||
| 5th axis spec. (Fanuc spec.) | 3D | |
|
|
|||