NC ROTARY TABLE
TR series
4축 고급사양
NC ROTARY TABLE
대형 공작물 가공을 위한 고성능 범위
중절삭에 적합한 고강성
유압식 클램핑 방식
높은 정확도
로터리 조인트 사용 가능
대형 관통 구멍
정확도를 더욱 높이기 위해 로터리 스케일을 장착할 수 있습니다.
Product Specifications
| Model | TLX250 | TLX320 | TRX321 | ||
|---|---|---|---|---|---|
| Right-handed Type | × | × | ○ | ||
| Left-handed Type | ○ | ○ | × | ||
| Table Diameter (mm) | ø250 | ø320 | ø320 | ||
| Centre Hole Diameter (mm) | ø105H7 | ø135H7 | ø135H7 | ||
| Through Hole Diameter (mm) | ø78 | ø110 | ø110 | ||
| Centre Height (mm) | 180 | 225 | 225 | ||
| Clamping Method | Hydraulic | Hydraulic | Hydraulic | ||
| Clamping Torque (N・m) (at hydraulic 3.5MPa) |
1100 | 2600 | 2600 | ||
| Motor Axis Reduced Inertia (kg・m2) | 0.00073 | 0.00085 | 0.00085 | ||
| Servomotor (for Fanuc spec.) | αiF 4/5000-B | αiF 8/3000-B | αiF 8/3000-B | ||
| Total Reduction Ratio | 4th axis spec. (Fanuc spec.) |
1/90 | 1/120 | 1/120 | |
| M signal spec. | 1/90 | 1/180 | 1/180 | ||
| Max. Rotation Speed (min-1) |
4th axis spec. (Fanuc spec.) |
33.3 |
25 |
25 |
|
| M signal spec. | 33.3 |
13.6 |
13.6 |
||
| Allowable Work Inertia (kg・m2) |
1.95 | 4.48 | 4.48 | ||
| Indexing Accuracy (sec) | 20 | 20 | 20 | ||
| Repeatability (sec) | 4 | 4 | 4 | ||
| Mass of Product (kg) | 142 | 181 | 181 | ||
| Allowable Load | Horizontal (kg) | 250 | 350 | 350 | |
| Vertical (kg) | 125 | 250 | 250 | ||
| Manual Tailstock （Option） |
TS250RN | TS320RN | TS320RN | ||
| Tail Spindle （Option） |
MSR181A/TSR181A TSR181H |
TSR181A45 TSR181H45 |
TSR181A45 TSR181H45 |
||
| Rotary Joint （Option） |
RJ70H25D05 Hydraulix / Pneumatic 6 ports |
RJ70H32K02 Hydraulix / Pneumatic 6 ports |
RJ70H32K02 Hydraulix / Pneumatic 6 ports |
||
| Outline Drawing | Kitagawa own controller spec. | 2D | - | - |  |
| - | - |  |
|||
| - | - |  |
|||
| 3D |  |
- | |
||
 |
- | |
|||
| 4th axis spec. (Fanuc spec.) |
2D | - | - | |
|
| - | - | |
|||
| - | - | |
|||
| 3D |  |
- | |
||
 |
- | |
|||
| Option Outline Drawing |
Tailstock | Tail Spindle | ||||
| Model | TR400(TL) | TR500(TL) | TR630 | ||
|---|---|---|---|---|---|
| Right-handed Type | ○ | ○ | ○ | ||
| Left-handed Type | ○ | ○ | × | ||
| Table Diameter (mm) | ø400 | ø500 | ø630 | ||
| Centre Hole Diameter (mm) | ø180H7 | ø200H7 | ø280H7 | ||
| Through Hole Diameter (mm) | ø150 | ø170 | ø250 | ||
| Centre Height (mm) | 255 | 310 | 400 | ||
| Clamping Method | Hydraulic | Hydraulic | Hydraulic | ||
| Clamping Torque (N・m) (at hydraulic 3.5MPa) |
2500 | 3200 | 4000 | ||
| Motor Axis Reduced Inertia (kg・m2) | 0.0028 | 0.0028 | 0.0064 | ||
| Servomotor (for Fanuc spec.) | αiF 12/4000-B | αiF 12/4000-B | αiF 22/3000-B | ||
| Total Reduction Ratio | 4th axis spec. (Fanuc spec.) |
1/180 | 1/180 | 1/180 | |
| M signal spec. | 1/180 | 1/180 | 1/180 | ||
| Max. Rotation Speed (min-1) |
4th axis spec. (Fanuc spec.) |
11.1 |
11.1 |
11.1 |
|
| M signal spec. | 11.1 |
11.1 |
8.3 |
||
| Allowable Work Inertia (kg・m2) |
10.00 | 18.73 | 49.62 | ||
| Indexing Accuracy (sec) | 20 | 20 | 20 | ||
| Repeatability (sec) | 4 | 4 | 4 | ||
| Mass of Product (kg) | 350 | 550 | 900 | ||
| Allowable Load | Horizontal (kg) | 500 | 600 | 1000 | |
| Vertical (kg) | 250 | 300 | 400 | ||
| Manual Tailstock （Option） |
TS400RN | TS500RN | TS630RN | ||
| Tail Spindle （Option） |
Order Production |
Order Production |
Order Production | ||
| Rotary Joint （Option） |
Order Production | Order Production | Order Production | ||
| Outline Drawing | Kitagawa own controller spec. | 3D | |
|
- |
|
|
- | |||
| 4th axis spec. (Fanuc spec.) |
3D | |
|
|
|
|
|
|
|||