NC ROTARY TABLE
TT series
5축 NCRT
NC ROTARY TABLE
5축 5fsce 가공 가능
컴팩트한 디자인
Product Specifications
| Model | TT101 | TW120 | TT140 | TT150 | ||
|---|---|---|---|---|---|---|
| Tilting Angle Range | -20°～+120° | -20°～+110° | -110°～+110° | -20°～+110° | ||
| Table Diameter (mm) | ø110 | ø125 | ø140 | ø150 | ||
| Centre Hole Diameter (mm) | ø50H7 | ø60H7 | ø60H7 | ø60H7 | ||
| Through Hole Diameter (mm) | ø32 | ø32 | ø32 | ø40 | ||
| Centre Height (mm) | 140 | 150 | 200 | 150 | ||
| Clamping Method | Pneumatic | Pneumatic | Pneumatic | Pneumatic | ||
| Clamping Torque (N･m) (at 0.5 MPa) |
Rotating axis | 180 | 120 | 280 | 350 | |
| Tilting axis | 300 | 200 | 500 | 550 | ||
| Motor Axis Reduced Inertia(kg·m2) | Rotating axis | 0.000082 | 0.000072 | 0.000269 | 0.000242 | |
| Tilting axis | 0.000081 | 0.000034 | 0.000288 | 0.000132 | ||
| Servomotor (for Fanuc spec.) |
Rotating axis | αiF 1/5000-B | αiF 2/5000-B | αiF 2/5000-B | αiF 2/5000-B | |
| Tilting axis | αiF 2/5000-B | αiF 2/5000-B | αiF 2/5000-B | αiF 2/5000-B | ||
| Total Reduction Ratio | Rotating axis | 1/72 | 1/90 | 1/72 | 1/72 | |
| Tilting axis | 1/120 | 1/180 | 1/180 | 1/180 | ||
| Max. Rotation Speed (min-1) |
Max. Rotation Speed (min-1) |
41.6 | 33.3 | 41.6 | 41.6 | |
| Max. Rotation Speed (min-1) |
25 | 16.6 | 16.6 | 16.6 | ||
| Allowable Work Inertia (kg･m2) | 0.05 | 0.06 | 0.12 | 0.14 | ||
| Indexing Accuracy (sec) | Rotating axis | 30 | 30 | 30 | 30 | |
| Tilting axis | 60 | 60 | 60 | 60 | ||
| Repeatability (sec) | 4 | 4 | 4 | 4 | ||
| Mass of Product (kg) | 73 | 105 | 158 | 141 | ||
| Allowable Load | at horizontal (kg) | 35 | 35 | 50 | 50 | |
| at tilted (kg) | 20 | 20 | 30 | 30 | ||
| Built-in Rotary Joint (as an option) | RJ32-10T05 Hydraulic/Pneumatic 3 ports |
RJ32-12T08 Hydraulic/Pneumatic 3 ports |
RJ32TT140 Hydraulic/Pneumatic 4 ports |
RJ40FTT150 Hydraulic/Pneumatic 4 ports + Pneumatic exclusive 1 port |
||
| Outline Drawing | Kitagawa own controller spec. |
2D |  |
|
|
|
 |
|
|
|
|||
 |
|
|
|
|||
 |
|
|
|
|||
| 3D (standard) |  |
- | |
|
||
 |
- | |
|
|||
| 3D (with rotary joint) | - | - | |
|
||
| - | - | |
|
|||
| 5th axis spec. (Fanuc spec.) |
3D (standard) | |
- | |
|
|
| |
- | |
|
|||
| 3D (with rotary joint) | - | - | |
|
||
| - | - | |
|
|||
| Model | TT182 | TW182 | TT200 | ||
|---|---|---|---|---|---|
| Tilting Angle Range | -35°～+110° | -35°～+110° | |||
| Table Diameter (mm) | ø180 | ø200 | |||
| Centre Hole Diameter (mm) | ø65H7 | ø65H7 | |||
| Through Hole Diameter (mm) | ø40 | ø40 | |||
| Centre Height (mm) | 180 | 180 | |||
| Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | |||
| Clamping Torque (N･m) (at pneumatic 0.5MPa /hydraulic 3.5MPa) |
Rotating axis | 450 | 600 | ||
| Tilting axis | 800 | 1200 | |||
| Motor Axis Reduced Inertia (kg･m2) | Rotating axis | 0.000242 | 0.000225 | ||
| Tilting axis | 0.000135 | 0.000125 | |||
| Servomotor (for Fanuc spec.) | αiF 2/5000-B | αiF 2/5000-B | |||
| Total Reducion Ratio | Rotating axis | 1/90 | 1/90 | ||
| Tilting axis | 1/180 | 1/180 | |||
| Max. Rotation Speed (min-1) |
Rotating axis |
33.3 | 33.3 | ||
| Tilting axis |
16.6 | 16.6 | |||
| Allowable Work Inertia (kg･m2) | 0.25 | 0.3 | |||
| Indexing Accuracy (sec) | Rotating axis | 20 | 20 | ||
| Tilting axis | 60 | 60 | |||
| Repeatability (sec) | 4 | 4 | |||
| Mass of Product (kg) | 163 | 178 | 170 | ||
| Allowable Load | at horizontal (kg) | 60 | 60 | ||
| at tilted (kg) | 40 | 40 | |||
| Built-in Rotary Joint (as an option) | RJ40FTT182 Hydraulic/Pneumatic 4 ports +Pneumatic exclusive 1 port |
RJ40FTT200 Hydraulic/Pneumatic 4 ports +Pneumatic exclusive 1 port |
|||
| Pneumatic Outer Cylinder (as an option) | NY1312T18B | NY1312T18B | |||
| Hydraulic Outer Cylinder (as an option) | NY0912T18A | NY0912T18A | |||
| Outline Drawing | Kitagawa own controller spec. |
2D | |
|
|
|
|
|
|||
|
|
|
|||
|
|
|
|||
| 3D (standard) | TT182BV |
TW182BV |
|
||
| TT182BV |
TW182BV |
|
|||
| 3D (with rotary joint) | TT182BVR |
TW182BVR |
|
||
| TT182BVR |
TW182BVR |
|
|||
| 5th axis spec. (Fanuc spec.) |
3D (standard) | TT182BF |
TW182BF |
|
|
| TT182BF |
TW182BF |
|
|||
| 3D (with rotary joint) | TT182BFR |
TW182BFR |
|
||
| TT182BFR |
TW182BFR |
|
|||
| Model | TT251/TW251 | TT321/TW321 | ||
|---|---|---|---|---|
| Tilting Angle Range | -35°～+110° | -35°～+110° | ||
| Table Diameter (mm) | ø250 | ø320 | ||
| Centre Hole Diameter (mm) | ø100H7 | ø135H7 | ||
| Through Hole Diameter (mm) | ø70 | ø110 | ||
| Centre Height (mm) | 225 | 255 | ||
| Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | ||
| Clamping Torque (N･m) (at pneumatic 0.45MPa /hydraulic 3.5MPa) |
Rotating axis | 900 | 2600 | |
| Tilting axis | 1200 | 2600 | ||
| Motor Axis Reduced Inertia (kg･m2) | Rotating axis | 0.00070 | 0.00083 | |
| Tilting axis | 0.00054 | 0.00046 | ||
| Servomotor (for Fanuc spec.) | αiF 4/5000-B | αiF 8/3000-B | ||
| Total Reduction Ratio | 4th axis spec. (Fanuc spec.) |
Rotating axis | 1/90 | 1/120 |
| Tilting axis | 1/180 | 1/360 | ||
| M signal spec. | Rotating axis | 1/90 | 1/180 | |
| Tilting axis | 1/180 | 1/360 | ||
| Max. Rotation Speed (min-1) |
4th axis spec. (Fanuc spec.) |
Rotating axis |
33.3 | 25 |
| Tilting axis |
16.6 | 8.3 | ||
| M signal spec. | Rotating axis |
33.3 | 16.6 | |
| Tilting axis |
16.6 | 8.3 | ||
| Allowable Work Inertia (kg･m2) | 0.78 | 1.92 | ||
| Indexing Accuracy (sec) | Rotating axis | 20 | 20 | |
| Tilting axis | 45 | 45 | ||
| Repeatability (sec) | 4 | 4 | ||
| Mass of Product (kg) | 260 / 270 | 350 / 360 | ||
| Allowable Load | at hotizontal (kg) | 100 | 150 | |
| at tilted (kg) | 60 | 100 | ||
| Rotary Joint (as an option) | RJ70H25T02 Hydraulic/Pneumatic 6 ports |
RJ70H32T03 Hydraulic/Pneumatic 6 ports |
||
| Outline Drawing | Kitagawa own controller spec. |
2D | |
|
|
|
|||
|
|
|||
|
|
|||
| 3D | TT251HV |
TT321HV |
||
| TT251HV |
TT321HV |
|||
| 5th axis spec. (Fanuc spec.) |
3D | TT251HFF |
TT321HFF |
|
| TT251HFF |
TT321HFF |
|||